Effects of peripheral blood neutrophil/lymphocyte ratio levels and their changes on the prognosis of patients with early cervical cancer.

Although some studies have reported on the levels and clinical significance of peripheral blood neutrophil/lymphocyte ratio (NLR) in cervical cancer, the role of NLR levels and their changes preoperatively and postoperatively in early cervical cancer remain unclear. Our analyses explored the preoperative and postoperative NLR in 203 patients with stage I-IIA cervical cancer and evaluated the relationship between NLR changes, clinicopathological characteristics, and patient prognosis. The cut-off preoperative and postoperative NLR values were determined using receiver operating characteristic curve analysis. Preoperative NLR correlated with age, menopausal status, tumor size, and vascular infiltration, whereas postoperative NLR correlated with tumor differentiation. Patients with cervical cancer with a high preoperative NLR had significantly shorter overall survival (OS) and progression-free survival (PFS) than other patients, whereas PFS was significantly lower in the high postoperative NLR group. When comparing postoperative and preoperative NLR values, we observed a significantly higher rate of increase in postmenopausal patients and those without vascular infiltration than that among premenopausal patients and those with vascular infiltration. However, no clear difference in prognosis was observed between the groups with increased and decreased NLR. Therefore, a high peripheral blood NLR may predict a poor prognosis in patients with early cervical cancer. The effect of NLR changes on the prognosis of patients with cervical cancer requires further verification in multicenter studies.

Microbial community evolution and functional trade-offs of biofilm in odor treatment biofilters.

Biofilters inoculated with activated sludge are widely used for odor control in WWTP. In this process, biofilm community evolution plays an important role in the function of reactor and is closely related to reactor performance. However, the trade-offs in biofilm community and bioreactor function during the operation are still unclear. Herein, an artificially constructed biofilter for odorous gas treatment was operated for 105 days to study the trade-offs in the biofilm community and function. Biofilm colonization was found to drive community evolution during the start-up phase (phase 1, days 0-25). Although the removal efficiency of the biofilter was unsatisfactory at this phase, the microbial genera related to quorum sensing and extracellular polymeric substance secretion led to the rapid accumulation of the biofilm (2.3 kg biomass/m3 filter bed /day). During the stable operation phase (phase 2, days 26-80), genera related to target-pollutant degradation showed increases in relative abundance, which accompanied a high removal efficiency and a stable accumulation of biofilm (1.1 kg biomass/m3 filter bed/day). At the clogging phase (phase 3, days 81-105), a sharp decline in the biofilm accumulation rate (0.5 kg biomass/m3 filter bed /day) and fluctuating removal efficiency were observed. The quorum quenching-related genera and quenching genes of signal molecules increased, and competition for resources among species drove the evolution of the community in this phase. The results of this study highlight the trade-offs in biofilm community and functions during the operation of bioreactors, which could help improve bioreactor performance from a biofilm community perspective.

Degradation of trichloroethylene by double dielectric barrier discharge (DDBD) plasma technology: Performance, product analysis and acute biotoxicity assessment.

Trichloroethylene is carcinogenic and poorly degraded by microorganisms in the environment. Advanced Oxidation Technology is considered to be an effective treatment technology for TCE degradation. In this study, a double dielectric barrier discharge (DDBD) reactor was established to decompose TCE. The influence of different condition parameters on DDBD treatment of TCE was investigated to determine the appropriate working conditions. The chemical composition and biotoxicity of TCE degradation products were also investigated. Results showed that when SIE was 300 J L-1, the removal efficiency could reach more than 90%. The energy yield could reach 72.99 g kWh-1 at low SIE and gradually decreased with the increase of SIE. The k of the Non-thermal plasma (NTP) treatment of TCE was about 0.01 L J-1. DDBD degradation products were mainly polychlorinated organic compounds and produced more than 373 mg m-3 ozone. Moreover, a plausible TCE degradation mechanism in the DDBD reactors was proposed. Lastly, the ecological safety and biotoxicity were evaluated, indicating that the generation of chlorinated organic products was the main cause of elevated acute biotoxicity.

Microbial community regulation and performance enhancement in gas biofilters by interrupting bacterial communication.

BACKGROUND: Controlling excess biomass accumulation and clogging is important for maintaining the performance of gas biofilters and reducing energy consumption. Interruption of bacterial communication (quorum quenching) can modulate gene expression and alter biofilm properties. However, whether the problem of excess biomass accumulation in gas biofilters can be addressed by interrupting bacterial communication remains unknown. RESULTS: In this study, parallel laboratory-scale gas biofilters were operated with Rhodococcus sp. BH4 (QQBF) and without Rhodococcus sp. BH4 (BF) to explore the effects of quorum quenching (QQ) bacteria on biomass accumulation and clogging. QQBF showed lower biomass accumulation (109 kg/m3) and superior operational stability (85-96%) than BF (170 kg/m3; 63-92%) at the end of the operation. Compared to BF, the QQBF biofilm had lower adhesion strength and decreased extracellular polymeric substance production, leading to easier detachment of biomass from filler surface into the leachate. Meanwhile, the relative abundance of quorum sensing (QS)-related species was found to decrease from 67 (BF) to 56% (QQBF). The QS function genes were also found a lower relative abundance in QQBF, compared with BF. Moreover, although both biofilters presented aromatic compounds removal performance, the keystone species in QQBF played an important role in maintaining biofilm stability, while the keystone species in BF exhibited great potential for biofilm formation. Finally, the possible influencing mechanism of Rhodococcus sp. BH4 on biofilm adhesion was demonstrated. Overall, the results of this study achieved excess biomass control while maintaining stable biofiltration performance (without interrupting operation) and greatly promoted the use of QQ technology in bioreactors. Video Abstract.

Reduction of biofilm adhesion strength by adjusting the characteristics of biofilms through enzymatic quorum quenching.

Biofilm adhesion to the surface of a carrier plays an essential role during biofilm formation. Quorum quenching (QQ) has been shown to have great potential for delaying biofouling. However, little is known about whether QQ reduces the adhesion strength of biofilms during the formation process to inhibit biomass accumulation. In this study, we explored the effect of enzymatic QQ on the adhesion strength during biofilm development. In addition, a quantitative method was used to measure the adhesion strength of biofilms based on the shear force of water flow. Experimental results showed that QQ enzyme could reduce the adhesion strength of biofilms by at least 37% compared with the control. Furthermore, the biofilm accumulation rates were 0.05673 and 0.08762 h-1 with and without the QQ enzyme, illustrating a negative effect of QQ enzyme on biofilm accumulation. Specifically, QQ was confirmed to reduce extracellular polymeric substances, decrease the relative hydrophobicity, change the zeta potential by degrading signal molecules, and weaken the adhesion strength of biofilms. The successful reduction of the adhesion strength of the biofilm through QQ could provide a new strategy for the management and regulation of biofilm adhesion in the bioreactor.

Emissions, measurement, and control of odor in livestock farms: A review.

Odor emissions from intensive livestock farms have attracted increased attention due to their adverse impacts on the environment and human health. Nevertheless, a systematic summary regarding the characteristics, sampling detection, and control technology for odor emissions from livestock farms is currently lacking. This paper compares the development of odor standards in different countries and summarizes the odor emission characteristics of livestock farms. Ammonia, the most common odor substance, can reach as high as 4100 ppm in the compost area. Sampling methods for point and area source odor emissions are introduced in this paper, and odor analysis methods are compared. Olfactometers, odorometers, and the triangle odor bag method are usually used to measure odor concentration. Odor control technologies are divided into three categories: physical (activated carbon adsorption, masking, and dilution diffusion), chemical (plant extract spraying, wet scrubbing, combustion, non-thermal plasma, and photocatalytic oxidation), and biological (biofiltration, biotrickling, and bioscrubbing). Each technology is elucidated, and the performance in the removal of different pollutants is summarized. The application scopes, costs, operational stability, and secondary pollution of the technologies are compared. The generation of secondary pollution and long-term operation stability are issues that should be considered in future technological development. Lastly, a case analysis for engineering application is conducted.

Improving Broadband White-Light Emission Performances of 2D Perovskites by Subtly Regulating Organic Cations.

Recently, 2D organic-inorganic hybrid lead halide perovskites have attracted intensive attention in solid-state luminescence fields such as single-component white-light emitters, and rational optimization of the photoluminescence (PL) performance through accurate structural-design strategies is still significant. Herein, by carefully choosing homologous aliphatic amines as templates, isotypical perovskites [DMEDA]PbCl4 (1, DMEDA=N,N-dimethylethylenediamine) and [DMPDA]PbCl4 (2, DMPDA=N,N-dimethyl-1,3-diaminopropane) having tunable and stable broadband bluish white emission properties were rationally designed. The subtle regulation of organic cations leads to a higher degree of distortion of the 2D [PbCl4 ]2- layers and enhanced photoluminescence quantum efficiencies (<1 % for 1 and 4.9 % for 2). The broadband light emissions could be ascribed to self-trapped excitons on the basis of structural characterization, time-resolved PL, temperature-dependent PL emission, and theoretical calculations. This work gives a new guidance to rationally optimize the PL properties of low-dimensional halide perovskites and affords a platform to probe the structure-property relationship.

A short review of bioaerosol emissions from gas bioreactors: Health threats, influencing factors and control technologies.

Bioaerosols have widely been a concern due to their potential harm to human health caused by the carrying and spreading of harmful microorganisms. Biofiltration has been generally used as a green and effective technology for processing VOCs. However, bioaerosols can be emitted into the atmosphere as secondary pollutants from the biofiltration process. This review presents an overview of bioaerosol emissions from gas bioreactors. The mechanism of bioaerosols production and the effect of biofiltration on bioaerosol emissions were analyzed. The results showed that the bioaerosol emission concentrations were generally exceeded 104 CFU m-3, which would damage to human health. Biomass, inlet gas velocity, moisture content, temperature, and some other factors have significant influences on bioaerosol emissions. Moreover, as a result of the analysis done herein, different inactivation technologies and microbial immobilization of bioaerosols were proposed and evaluated as a potential solution for reducing bioaerosols emissions. The purpose of this paper is to make more people realize the importance of controlling the emissions of bioaerosols in the biofiltration process and to make the treatment of VOCs by biotechnology more environmentally friendly. Additionally, the present work intends to increase people's awareness in regards to the control of bioaerosols, including microbial fragment present in bioaerosols.

Gel-encapsulated microorganisms used as a strategy to rapidly recover biofilters after starvation interruption.

Biosystems used for volatile organic compound (VOC) control have slow re-acclimation after extended starvation. In this study, a gel-encapsuled microorganism biofilter (GEBF) for the treatment of VOCs was used for rapid recovery after starvation interruption. Another conventional perlite biofilter (BF) was used as a control. Results showed that GEBF and BF needed 3 and 6 days for fully recovery after short-term (6 days) starvation. For long-term (20 days) starvation, GEBF fully recovered the removal performance after 9 days, whereas BF recovered only 70% within the same period. Flow cytometry analysis indicated that GEBF presented better viability state of microbial population than that in BF under starvation. The average metabolic activity of microorganisms in GEBF remained a relatively high during and after starvation (0.0049 h-1). However, the average metabolic activity of microorganisms in BF decreased from 0.0042 h-1 before starvation to 0.0033 h-1 under starvation. Changes in the microbial community structure in GEBF and BF were investigated and compared by high-throughput sequencing and principal component analysis. Notably, the microbial community structure in the two biofilters showed different behavior. All these results demonstrated that the gel encapsulation of microorganisms is a promising strategy to resist starvation in biofiltration technologies.

Performance enhancement of a biofilter with pH buffering and filter bed supporting material in removal of chlorobenzene.

Acidic substances, which produced during chlorinated volatile organic compounds, will corrode the commonly used packing materials, and then affect the removal performance of biofiltration. In this study, three biofilters with different filter bed structure were established to treat gaseous chlorobenzene. CaCO3 and 3D matrix material was added in filter bed as pH buffering material and filter bed supporting material, respectively. A comprehensive investigation of removal performance, biomass accumulation, microbial community, filter bed height, voidage, pressure drops, and specific surface area of the three biofilters was compared. The biofilter with CaCO3 and 3D matrix material addition presented stable removal performance and microbial community, and greater biomass density (209.9 kg biomass/m3 filter bed) and growth rate (0.033 d-1) were obtained by using logistic equation. After 200 days operation, the height, voidage, pressure drop, specific surface area of the filter bed consisted of perlite was 27.4 cm, 0.39, 32.8 Pa/m, 974,89 m2/m3, while those of the filter bed with CaCO3 addition was 28.2 cm, 0.43, 21.3 Pa/m, and 1021.03 m2/m3, and those of the filter bed with CaCO3 and 3D matrix material addition was 28.7 cm, 0.55, 17.4 Pa/m, and 1041.60 m2/m3. All the results verified the biofilter with CaCO3 and 3D matrix material addition is capable of sustaining the long-term performance of biofilters. CaCO3 could limit the changes of removal efficiency, microbial community and filter bed structure by buffering the pH variation. And 3D matrix material could maintain the filter bed structure by supporting the filter bed, regardless of the buffering effect.

The anti-tumour effect of Mel and its role in autophagy in human hepatocellular carcinoma cells.

Melittin (Mel), a major component of venom of honey bee (Apismellifera), has various biological effects. Recent researches have reported the anti-tumor activity of Mel in various human cancers, including hepatocellular carcinoma (HCC). In this study, we aimed to further discuss the role of Mel in HCC and investigate the correlation of autophagy with the effect of Mel in HCC cells. Methyl thiazolyl tetrazolium (MTT) assay and flow cytometry were used to detect the viability and apoptosis of HCC cells, respectively. To examine the changes of autophagy in HCC cells treated with Mel, transmission electronmicroscope (TEM) and immunofluorescence detection were adopted. Finally, we used western blot method to detect the changes of pivotal proteins in autophagy and mitochondrial apoptotic pathways. The results of MTT assay and flow cytometry revealed that Mel could suppress the cell viability and promote the apoptosis of HCC cells. Autophagy could be induced by the treatment with Mel in HCC cells. The inhibition of autophagy by chloroquine (CQ) contributed to the enhanced anti-tumor effect of Mel, but autophagy induction by RAPA decreased Mel effect in HCC cells. Mel was closely associated with the expression of proteins in mitochondrial apoptotic pathway. In summary, Mel could induce the autophagy of HCC cells, and the autophagy might offer protection against apoptosis in HCC. Mel might suppress the tumor through activating mitochondrial apoptotic pathway.

Treatment of hydrophobic volatile organic compounds using two-liquid phase biofilters.

The traditional one-liquid phase biofilter (OLPB), with water as the selected liquid phase, demonstrated low performance to volatile hydrophobic organic compounds. In this study, a novel two-liquid phase biofilter (TLPB) using silicone oil and water was established to treat gaseous dichloromethane (DCM). A comprehensive investigation of removal performance, kinetic analysis, biomass accumulations, pressure drops, CO2 productions, and microbial communities of the two biofilters was compared. Results showed that TLPB presented an average removal efficiency of 85% during 200 days of operation, which was higher than that of OLPB (63%). Owing to the buffering effects caused by silicone oil, TLPB demonstrated a superior fluctuation resistance capability than OLPB. TLPB was determined at a higher actual mass distribution coefficient of 6.00 than that of the OLPB (3.99), thereby suggesting a significantly more effective mass transfer process inside TLPB compared with that in OLPB. Furthermore, a rapid biomass accumulation process was observed in TLPB. The specific growth rates of biomass in OLPB and TLPB were calculated as 0.035 and 0.026 g of dry biomass/g of dry filter per day, respectively. The carbon balances were analyzed in the two biofilters. The yield coefficients (Y) were determined at 1.449 and 1.143 g of dry biomass/g of removed VOC for OLPB and TLPB, respectively. However, the corresponding CO2 production fraction was 0.263 g and 0.316 g per 1 g of DCM for OLPB and TLPB, respectively. The variations in fraction of carbon in DCM transformation to biomass and to CO2 suggested distinct microbial transformation pathways of utilizing DCM in the two biofilters, which were mainly caused by the different microbial communities and metabolic activities.

Comparison of physical technologies for biomass control in biofilters treating gaseous toluene.

Excessive accumulation of biomass within gas-phase biofilters often results in the deterioration of removal performance. Compared with chemical and biological technologies, physical technologies are more effective in removing biomass and inducing less inhibition of the biofilter performance. This study applied different physical technologies, namely, air sparging, mechanical mixing, and washing with water at various temperatures, to remove excess biomass in biofilters treating toluene. Filter pressure drop, removed dry biomass, biofilter performance, and microbial metabolic characteristics were analyzed to evaluate the effectiveness of the methods. Results showed that air sparging was inefficient for biomass removal (1 kg dry biomass/m3 filter), whereas mechanical mixing significantly inhibited removal efficiencies (<30%). Washing of the packing with fluids was feasible, and hot fluids can remove a large amount of biomass. However, hot fluids reduce microbial activity and inhibit removal performance. Washing of the packing with either 20°C or 50°C water showed efficiency as >3 kg dry biomass/m3 filter can be removed at both temperatures with removal efficiencies at approximately 40% after treatment. Finally, different technologies were compared and summarized to propose an optimized strategy of biomass control for industrial biofilters. IMPLICATIONS: This study is to apply different physical technologies, namely, air sparging, mechanical mixing, and washing with water of different temperatures, to remove the excess biomass in biofilters treating toluene. The filter pressure drop, removed dry biomass, biofilter performance, and microbial metabolic characteristics were all analyzed to evaluate the effectiveness of the methods. The results of this study provide useful information regarding biomass control of industrial biofilters.